Brazing Filler Metal in bare rods form when coated with relevant flux forms Flux Coated Brazing Rods. The main elements in Flux Coated Brazing Rods are:

1) Diameter and length of the bare rods to be coated
2) Outer diameter of the Flux coated rods

Why Flux coated brazing rods are preferred over traditional separate rod and flux application:

1) There is no need to use a separate flux.
2) Flux coated brazing alloy can be used directly on the job without separate application of flux making the operation quick and economical.
3) Compatibility of flux with the brazing alloy as supplied by the same manufacturer.
4) There is uniform flow of flux along with the brazing alloy during the brazing operation.
5) It eliminates the need for final fluxing step. As a result the final cleaning is easier, and fewer contaminants are contained in rinse water.

ALFA Flux Coated Brazing Rods

We have launched ALFA range of Flux coated brazing rods. Our range includes
1) Flux Coated Silver Brazing Alloys.
2) Flux Coated Brass Brazing Alloys.

 Flux Coated Silver Brazing Alloys

Composition Basis

Silver, Copper, Zinc, with OR Without Cadmium. Silver Brazing Alloys filler metal can be selected based on specifications laid out by
1) IS 2927-1975 ii) BS:1845 iii) AWS A5.8 iv) DIN 8513 v) EN 1044

Characteristics

Delivery Forms